- Главная страница
- Поиск продуктов
- Epoxy
- CYCOM® PR 520 RTM
CYCOM® PR 520 RTM
| Категория | Epoxy, Epoxy; Epoxide |
| Производитель | Cytec Industries Inc. |
| Торговая марка | CYCOM® |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
D45gRd_CYCOM-PR-520-RTM.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
CYCOM® PR 520 RTM is a one-part, 180°C (355°F) curing epoxy resin system offering superior damage tolerance and good strain to failure required for composite primary structure applications. The value of resin infusion is the ability to design complex geometric parts while leveraging a unitized structure which ultimately leads to a reduction in weight, lower part counts and the elimination of many post-manufacturing processes. CYCOM PR 520 RTM is an off-white thick paste at room temperature reducing to a low viscosity when heated for injection. The resin has a low enough viscosity to allow injection at 90 - 100°C (194 - 212°F). Following injection, the resin viscosity decreases with increasing tool temperature to below 50 cP, thus helping to ensure full fiber wetting. CYCOM PR 520 RTM resin is fully cured following a 2-hour dwell at 180°C (355°F) after which it has a continuous hot/wet service temperature of 104°C (220°F). For reinforcement preforming operations, a fully compatible binder system, CYCOM® 7720 RTM, and a low areal weight film, PR 520-1, have been developed for use with CYCOM PR 520 RTM. The binder and low areal weight film are available pre-coated onto fabrics of the customer's choice. A separate datasheet for CYCOM 7720 RTM is available upon request.
Suggested Applications:
Engine Blades
Engine Blade Spacers/Platforms
Containment Cases
Outer Guide Vanes
Hinge/Brackets/Fittings
Suggested Applications:
Engine Blades
Engine Blade Spacers/Platforms
Containment Cases
Outer Guide Vanes
Hinge/Brackets/Fittings
| Главная Информация | |
|---|---|
| Характеристики |
|
| Используется |
|
| Формы |
|
| Физический | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Удельный вес 1 | 1.25 | g/cm³ |
| Механические | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Модуль растяжения 2(24°C) | 4000 | MPa | |
| Прочность на растяжение 3(24°C) | 82.0 | MPa | |
| Удлинение при растяжении 4(Break) | 3.0 | % | |
| Флекторный модуль 5 | 3450 | MPa | |
| Flexural Strength 6 | 153 | MPa | |
| Прочность на сжатие 7(24°C) | 128 | MPa | |
| Модуль сдвига 8 | 827 | MPa | |
| Прочность сдвига 9(24°C) | 61.4 | MPa |
| Тепловой | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Температура перехода стекла 10 | 161 | °C |
| Примечание | |
|---|---|
| 1 . | Neat Resin |
| 2 . | Neat Resin |
| 3 . | Neat Resin |
| 4 . | Neat Resin |
| 5 . | Neat Resin |
| 6 . | Neat Resin |
| 7 . | Neat Resin |
| 8 . | Neat Resin |
| 9 . | Neat Resin |
| 10 . | By DSC |
| Тип материала | Категория | Производитель |
|---|---|---|
| SHIN-A SEN-280MPM70 | Epoxy | SHIN-A T&C |
| Ebalta AH 140 / LI 20 | Epoxy | Ebalta Kunststoff GmbH |
| EPO-TEK® 360ST | Epoxy | Epoxy Technology Inc. |
| EpoxAmite® 103 SLOW | Epoxy | Smooth-On, Inc |
| Epocast 1636-A/B | Epoxy | Huntsman Advanced Materials |
| FARBOSET® 5000 | Epoxy | Cosmic Plastics, Inc. |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved