LUVOCOM® 100-7126 VP

Категория	PUR, Polyurethane , PUR, Unspecified
Производитель	Lehmann & Voss & Co.
Торговая марка	LUVOCOM®
Порт	Китай Шанхайский порт
Торговые условия	FOB, CFR, CIF
Платежное средство	L/C, T/T, Western Union
PDF	BW2SPd_LUVOCOM-100-7126-VP.pdf
Контактная информация	EMAIL US  sales@su-jiao.com Служба поддержки клиентов Вичат

Описание материалов:

LUVOCOM®100-7126 VP is a thermoplastic polyurethane elastomer material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific,.

LUVOCOM®The main features of 100-7126 VP are:

Wear-resistant

Lubrication

Typical application areas include:

engineering/industrial accessories

Handle

Главная Информация
Добавка	Ptfe лубрикант
Характеристики	Низкий коэффициент трения Хорошая стойкость к истиранию Смазка
Используется	Ручка Ролик Подшипник
Внешний вид	Натуральный цвет

Физический	Номинальное значение	Единица измерения	Метод испытания
Плотность	1.26	g/cm³	ISO 1183
Массовый расход расплава (MFR) (190°C/10.0 kg)	12	g/10 min	ISO 1133
Формовочная усадка	1.5 - 2.0	%	DIN 16901
Поглощение воды (23°C, 24 hr)	< 0.40	%

Твердость	Номинальное значение	Единица измерения	Метод испытания
Твердость дюрометра (Shore A)	82		ISO 868

Механические	Номинальное значение	Единица измерения	Метод испытания
Tensile Stress (Break)	24.0	MPa	ISO 527-2
Растяжимое напряжение (Yield)	750	%	ISO 527-2

Воздействие	Номинальное значение	Единица измерения	Метод испытания
Charpy Unnotched Impact Strength (23°C)	No Break		ISO 179/1fU

Тепловой	Номинальное значение	Единица измерения	Метод испытания
Температура непрерывного использования	90.0	°C	UL 746B
Максимальная рабочая температура- Короткий срок	120	°C

Электрический	Номинальное значение	Единица измерения	Метод испытания
Insulation Resistance	> 1.0E+12	ohms	IEC 60167

Тепловой	Номинальное значение	Единица измерения	Метод испытания
Викат Температура размягчения	115	°C	ISO 306/A

Электрический	Номинальное значение	Единица измерения	Метод испытания
Удельное сопротивление поверхности	> 1.0E+12	ohms	IEC 60093

Инъекция	Номинальное значение	Единица измерения
Температура сушки
Dehumidification desiccant, B	100 - 110	°C
Hot air dryer, A	60.0 - 90.0	°C
Время сушки
Dehumidification desiccant, B	2.0 - 3.0	hr
Hot air dryer, A	2.0 - 3.0	hr
Рекомендуемая максимальная влажность	0.010	%
Задняя температура	190 - 230	°C
Средняя температура	190 - 230	°C
Передняя температура	190 - 230	°C
Температура сопла	200 - 240	°C
Температура обработки (расплава)	225	°C
Температура формы	25.0 - 60.0	°C

Инструкции по впрыску
General In general LUVOCOM® can be processed on conventional injection moulding machines while observing the usual technical guidelines. Any added fibrous materials or fillers may have an abrasive effect. In this case the cylinder and screw should be protected against wear as is usual in the processing of reinforced thermoplastic materials. Lengthy dwell times for the melts in the cylinder should be avoided. Lower the temperatures during interruptions! Predrying (optional) It is advisable to predry the granulate with a suitable dryer immediately before processing. The granulate may absorb moisture from the air. Delivery Form & Storage Unless indicated otherwise, the material is delivered as 3mm-long pellets in sealed bags on pallets. Preferably storage should be effected in dry and normally temperatured rooms Additional Information During processing, the moisture level should not exceed 0.01%, otherwise molecular degradation may occur. As the material absorbs water very rapidly, originally sealed containers should only be opened immediately before processing. The processing notes provided merely represent a recommendation for general use. Due to the large variety of machines, geometries and volumes of parts, etc., it may be necessary to employ different settings according to the specific application. Please contact us for further information.

Инструкции по впрыску

General In general LUVOCOM® can be processed on conventional injection moulding machines while observing the usual technical guidelines. Any added fibrous materials or fillers may have an abrasive effect. In this case the cylinder and screw should be protected against wear as is usual in the processing of reinforced thermoplastic materials. Lengthy dwell times for the melts in the cylinder should be avoided. Lower the temperatures during interruptions! Predrying (optional) It is advisable to predry the granulate with a suitable dryer immediately before processing. The granulate may absorb moisture from the air. Delivery Form & Storage Unless indicated otherwise, the material is delivered as 3mm-long pellets in sealed bags on pallets. Preferably storage should be effected in dry and normally temperatured rooms Additional Information During processing, the moisture level should not exceed 0.01%, otherwise molecular degradation may occur. As the material absorbs water very rapidly, originally sealed containers should only be opened immediately before processing. The processing notes provided merely represent a recommendation for general use. Due to the large variety of machines, geometries and volumes of parts, etc., it may be necessary to employ different settings according to the specific application. Please contact us for further information.

Тип материала	Категория	Производитель
Andur 9500 APLF	PUR-Ether/TDI	Anderson Development Company
Xuchuan XCW-8090SC	PUR, Unspecified	Xuchuan Chemical (Suzhou) Co., Ltd
Andur 90 AP/Curene® 442	PUR-Ether/TDI	Anderson Development Company
Ecomass® 4703BI71	PUR, Unspecified	Ecomass Technologies
Huafon JF-S-8080	PUR, Unspecified	Huafon Group Co., Ltd.
Huafon JF-W-3030	PUR, Unspecified	Huafon Group Co., Ltd.

Получите информацию об этом продукте следующим способом.

Телефон	+086 13424755533
EMAIL US	sales@su-jiao.com
Служба поддержки клиентов Вичат

