- Главная страница
- Поиск продуктов
- PP
- Pinnacle PP 1355Z
Pinnacle PP 1355Z
| Категория | PP, Polypropylene Homopolymer , PP Homopolymer |
| Производитель | Pinnacle Polymers |
| Торговая марка | Pinnacle PP |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
BS1lAu_Pinnacle-PP-1355Z.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
55 MELT FLOW HOMOPOLYMER POLYPROPYLENE WITH NUCLEATOR AND ANTISTAT FOR THIN WALL INJECTION MOLDING
Pinnacle Polymers Polypropylene 1355Z is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.
This product is intended for thin-wall injection molded applications including closures, food containers and miscellaneous consumer products applications that require high stiffness.
The 1355Z product provides:
This product, as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, and Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.
Pinnacle Polymers Polypropylene 1355Z is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.
This product is intended for thin-wall injection molded applications including closures, food containers and miscellaneous consumer products applications that require high stiffness.
The 1355Z product provides:
- Superior set-up behavior
- Excellent color and processing stability
- Low odor and taste
- Excellent flow characteristics
- High stiffness
- Nucleation and antistat
This product, as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, and Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.
| Главная Информация | |
|---|---|
| Добавка |
|
| Характеристики |
|
| Используется |
|
| Рейтинг агентства |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Плотность | 0.900 | g/cm³ | ASTM D1505 |
| Массовый расход расплава (MFR) (230°C/2.16 kg) | 55 | g/10 min | ASTM D1238 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Прочность на растяжение 1(Yield, 3.20 mm, Injection Molded) | 39.3 | MPa | ASTM D638 |
| Удлинение при растяжении 2(Yield, 3.20 mm, Injection Molded) | 8.0 | % | ASTM D638 |
| Флекторный модуль- 1% Secant 3(3.20 mm, Injection Molded) | 1930 | MPa | ASTM D790A |
| Воздействие | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Зубчатый изод Impact 4(23°C, 3.20 mm, Injection Molded) | 32 | J/m | ASTM D256 |
| Зубчатый изод удара (площадь) 5(23°C, 3.20 mm, Injection Molded) | 3.00 | kJ/m² | ASTM D256 |
| Примечание | |
|---|---|
| 1 . | Type I, 51 mm/min |
| 2 . | Type I, 51 mm/min |
| 3 . | Type I, 1.3 mm/min |
| 4 . | Type I |
| 5 . | Type I |
| Тип материала | Категория | Производитель |
|---|---|---|
| SAMAT EP5001A(f1) | PP, Unspecified | POLYROCKS CHEMICAL CO., LTD |
| Toler PP PP3832 | PP Impact Copolymer | Toler Chemical, Inc |
| CERTENE™ PBM-80N | PP Impact Copolymer | Muehlstein |
| COPYLENE® CR750CL-02 | PP Random Copolymer | Phillips 66 |
| Formolene® 1104KR | PP Homopolymer | Formosa Plastics Corporation, U.S.A. |
| KOPLA PP KPR1166 | PP, Unspecified | KOPLA Co., Ltd. |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved