- Главная страница
- Поиск продуктов
- PI
- AVIMID® R
AVIMID® R
| Категория | PI, Thermoset Polyimide , PI, TS |
| Производитель | Cytec Industries Inc. |
| Торговая марка | AVIMID® |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
Aboatu_AVIMID-R.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
AVIMID® R is a high temperature, 581°F (305°C) Tg, thermoset polyimide resin with good 500°F (260°C) wet and 550°F (288°C) dry service capability. AVIMID R has outstanding thermal oxidative stability, excellent resistance to aircraft fluids and is tough, showing little micro-cracking during severe thermal cycling.
AVIMID R was formulated for prepreg autoclave vacuum bag processing but can be successfully compression molded both as a prepreg and in dry forms as neat resin or chopped-fiber molding compound. Unidirectional tape and woven prepreg of AMIMID R will retain tack and drape for 14 days at 70°F (21°C).
Standard autoclave or compression molding processes, to a final temperature of 680°F (360°C) will result in full Tg development/cure, with no need for any post-cure treatment. AVIMID R can be solution impregnated on a variety of fibers and fabrics.
Suggested Applications:
Jet engine components
AVIMID R was formulated for prepreg autoclave vacuum bag processing but can be successfully compression molded both as a prepreg and in dry forms as neat resin or chopped-fiber molding compound. Unidirectional tape and woven prepreg of AMIMID R will retain tack and drape for 14 days at 70°F (21°C).
Standard autoclave or compression molding processes, to a final temperature of 680°F (360°C) will result in full Tg development/cure, with no need for any post-cure treatment. AVIMID R can be solution impregnated on a variety of fibers and fabrics.
Suggested Applications:
Jet engine components
| Главная Информация | |
|---|---|
| Характеристики |
|
| Используется |
|
| Формы |
|
| Метод обработки |
|
| Механические | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Модуль растяжения 1 | 3590 | MPa | |
| Прочность на растяжение 2 | 117 | MPa | |
| Удлинение при растяжении (Break) | 3.3 | % |
| Тепловой | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Температура перехода стекла | |||
| -- 3 | 305 | °C | |
| -- 4 | 487 | °C |
| Примечание | |
|---|---|
| 1 . | Neat resin |
| 2 . | Neat resin |
| 3 . | DMA, Dry |
| 4 . | DMA, Wet |
| Тип материала | Категория | Производитель |
|---|---|---|
| APICAL 100AV | Film, PI | Kaneka Corporation |
| KYOCERA CT4200H | PI, TS | KYOCERA Chemical Corporation |
| Arlon® 37N | PI, TP | Arlon-MED |
| LUVOCOM® TPI-8257 | PI, TP | Lehmann & Voss & Co. |
| EXTEM™ XH1015 resin | PI, TP | SABIC Innovative Plastics |
| APICAL 120AF616 | Film, PI | Kaneka Corporation |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved