LUVOCOM® 1200-8835

Категория	ABS, Acrylonitrile Butadiene Styrene
Производитель	Lehmann & Voss & Co.
Торговая марка	LUVOCOM®
Порт	Китай Шанхайский порт
Торговые условия	FOB, CFR, CIF
Платежное средство	L/C, T/T, Western Union
PDF	8EUFXd_LUVOCOM-1200-8835.pdf
Контактная информация	EMAIL US  sales@su-jiao.com Служба поддержки клиентов Вичат

Описание материалов:

LUVOCOM®1200-8835 is an acrylonitrile butadiene styrene (ABS) material,. This product is available in Europe,.

LUVOCOM®The main features of 1200-8835 are:

Antistatic

chemical resistance

Hydrolytic stability

Typical application areas include:

engineering/industrial accessories

Tools

food contact applications

Главная Информация
Добавка	Антистатические свойства
Характеристики	Антистатические свойства Хорошая химическая стойкость Стабильность гидролиза
Используется	Неспецифическое применение пищи Инженерные аксессуары Машина/механические детали Литьевая форма/инструмент
Внешний вид	Черный

Физический	Номинальное значение	Единица измерения	Метод испытания
Плотность	2.65	g/cm³	ISO 1183
Формовочная усадка	0.20 - 0.30	%	DIN 16901
Поглощение воды (23°C, 24 hr)	< 0.30	%

Механические	Номинальное значение	Единица измерения	Метод испытания
Модуль растяжения	5000	MPa	ISO 527-2
Tensile Stress (Break)	16.0	MPa	ISO 527-2
Растяжимое напряжение (Yield)	1.1	%	ISO 527-2

Тепловой	Номинальное значение	Единица измерения	Метод испытания
Температура непрерывного использования	60.0	°C	UL 746B
Максимальная рабочая температура- Короткий срок	80	°C

Электрический	Номинальное значение	Единица измерения	Метод испытания
Insulation Resistance		ohms	IEC 60167
Удельное сопротивление поверхности	< 1.0E+6	ohms	IEC 60093

Инъекция	Номинальное значение	Единица измерения
Температура сушки- Осушитель сушилка	70.0 - 95.0	°C
Время сушки- Осушитель сушилка	2.0 - 4.0	hr
Рекомендуемая максимальная влажность	0.10	%
Задняя температура	220 - 250	°C
Средняя температура	220 - 250	°C
Передняя температура	230 - 260	°C
Температура сопла	220 - 250	°C
Температура обработки (расплава)	230 - 260	°C
Температура формы	40.0 - 80.0	°C

Инструкции по впрыску
General In general LUVOCOM® can be processed on conventional injection moulding machines while observing the usual technical guidelines. Any added fibrous materials or fillers may have an abrasive effect. In this case the cylinder and screw should be protected against wear as is usual in the processing of reinforced thermoplastic materials. Lengthy dwell times for the melts in the cylinder should be avoided. Lower the temperatures during interruptions! Predrying (optional) It is advisable to predry the granulate with a suitable dryer immediately before processing. The granulate may absorb moisture from the air. Delivery Form & Storage Unless indicated otherwise, the material is delivered as 3mm-long pellets in sealed bags on pallets. Preferably storage should be effected in dry and normally temperatured rooms Additional Information During processing, the moisture content should not exceed 0.1%. Moisture may lead to smearing and in extreme cases to foaming. Usually the material can be processed over a broad temperature range and can thus be adapted to a wide variety of processing conditions. Temperatures >270°C may lead to thermal damage. The processing notes provided merely represent a recommendation for general use. Due to the large variety of machines, geometries and volumes of parts, etc., it may be necessary to employ different settings according to the specific application. Please contact us for further information.

Инструкции по впрыску

General In general LUVOCOM® can be processed on conventional injection moulding machines while observing the usual technical guidelines. Any added fibrous materials or fillers may have an abrasive effect. In this case the cylinder and screw should be protected against wear as is usual in the processing of reinforced thermoplastic materials. Lengthy dwell times for the melts in the cylinder should be avoided. Lower the temperatures during interruptions! Predrying (optional) It is advisable to predry the granulate with a suitable dryer immediately before processing. The granulate may absorb moisture from the air. Delivery Form & Storage Unless indicated otherwise, the material is delivered as 3mm-long pellets in sealed bags on pallets. Preferably storage should be effected in dry and normally temperatured rooms Additional Information During processing, the moisture content should not exceed 0.1%. Moisture may lead to smearing and in extreme cases to foaming. Usually the material can be processed over a broad temperature range and can thus be adapted to a wide variety of processing conditions. Temperatures >270°C may lead to thermal damage. The processing notes provided merely represent a recommendation for general use. Due to the large variety of machines, geometries and volumes of parts, etc., it may be necessary to employ different settings according to the specific application. Please contact us for further information.

Тип материала	Категория	Производитель
Tisakril® ABS UNR	ABS	Tisan
Toyolac® 530-X01	ABS	Toray Resin Company
TRILAC® ABS-HH2350	ABS	Polymer Technology and Services, LLC
Lupos庐 HR2207A	ABS	LG Chem Ltd.
Plaslube® ABS TX15	ABS	Techmer Engineered Solutions
Starex GR-4010	ABS	SAMSUNG SDI CO., LTD.

Получите информацию об этом продукте следующим способом.

Телефон	+086 13424755533
EMAIL US	sales@su-jiao.com
Служба поддержки клиентов Вичат

