- Главная страница
- Поиск продуктов
- MDPE
- FINGERPRINT™ DFDC-7525 NT
FINGERPRINT™ DFDC-7525 NT
| Категория | MDPE, Polyethylene Resin |
| Производитель | The Dow Chemical Company |
| Торговая марка | FINGERPRINT™ |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
6wnXL2_FINGERPRINT-DFDC-7525-NT.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
FINGERPRINT™DFDC-7525 NT is a medium density polyethylene resin, and its preparation process uses Unipol™Processing technology. The resin is applied to thin-wall micro-irrigation tape and profile extrusion processing. DFDC-7525 NT has good drafting characteristics, which makes the processed strip achieve a reliable balance between convenient extrusion and toughness.
this product can also be used as a blending component for the modification of high pressure, very low density, linear low density or high density polyethylene resin to improve its physical properties. Outdoor applications need to add UV stabilizers to maintain excellent performance under long-term UV exposure. Adding 6.5% Dow DFNF-0092 carbon black color masterbatch can make the product have certain UV resistance.
Main features:
slip agent content: none
opening agent content: none
industry standard
this product can also be used as a blending component for the modification of high pressure, very low density, linear low density or high density polyethylene resin to improve its physical properties. Outdoor applications need to add UV stabilizers to maintain excellent performance under long-term UV exposure. Adding 6.5% Dow DFNF-0092 carbon black color masterbatch can make the product have certain UV resistance.
Main features:
- High tensile properties
- high elongation
- Excellent blasting strength
slip agent content: none
opening agent content: none
industry standard
- ASTM D 3350: step PE234510A
| Главная Информация | |
|---|---|
| Рейтинг агентства |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Удельный вес | 0.939 | g/cm³ | ASTM D792 |
| Массовый расход расплава (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | > 0.15 | g/10 min | ASTM D1238 |
| 190°C/21.6 kg | 20 | g/10 min | ASTM D1238 |
| Экологическое сопротивление растрескиванию 1(F0) | > 2000 | hr | ASTM D1693A |
| Твердость | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Твердость дюрометра 2(Shore D) | 55 | ASTM D2240 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Прочность на растяжение 3 | ASTM D638 | ||
| Yield | 26.2 | MPa | ASTM D638 |
| Fracture | 30.0 | MPa | ASTM D638 |
| Удлинение при растяжении 4(Break) | > 800 | % | ASTM D638 |
| Флекторный модуль 5 | 689 | MPa | ASTM D790 |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Температура ломкости 6 | < -100 | °C | ASTM D746A |
| Викат Температура размягчения | 116 | °C | ASTM D1525 |
| Температура плавления (DSC) | 125 | °C | Internal method |
| Экструзия | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Температура расплава | 221 - 249 | °C |
| Инструкции по экструзии |
|---|
| 吹塑薄膜的制造条件： 螺杆类型：所有标准的商用挤出设备。 熔体温度范围：430 - 480 °F (220 - 250 °C) |
| Примечание | |
|---|---|
| 1 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| 2 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| 3 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| 4 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| 5 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| 6 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| Тип материала | Категория | Производитель |
|---|---|---|
| TOTAL Polyethylene MDPE HT 514 | MDPE | TOTAL Refining & Chemicals |
| DOW™ MDPE DPDA-3170 NT 7 | MDPE | The Dow Chemical Company |
| NEFTEKHIM PE 6438R | MDPE | Nizhnekamskneftekhim Inc. |
| BorSafe™ ME3441 | MDPE | Borealis AG |
| Luflexen hyPE 35 P FA | MDPE | LyondellBasell Industries |
| Marlex® HMN TR-935 | MDPE | Chevron Phillips Chemical Company LLC |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved