- Главная страница
- Поиск продуктов
- TPE
- Dryflex® SE 40A201
Dryflex® SE 40A201
| Категория | TPE, Thermoplastic Elastomer |
| Производитель | ELASTO |
| Торговая марка | Dryflex® |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
6GyIyX_DryflexSE40A201.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The Dryflex SE semi-filled series is recommended when the properties of the produced detail requires the advantages of the unfilled series in combination with the filled series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance.
Compounds in the Dryflex SE semi-filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The Dryflex SE semi-filled series is recommended when the properties of the produced detail requires the advantages of the unfilled series in combination with the filled series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance.
Compounds in the Dryflex SE semi-filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
| Главная Информация | |
|---|---|
| Наполнитель/армирование |
|
| Характеристики |
|
| Используется |
|
| Рейтинг агентства |
|
| Соответствие RoHS |
|
| Внешний вид |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Плотность | 1.00 | g/cm³ | ISO 2781 |
| Твердость | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Твердость дюрометра (Shore A, 15 sec) | 40 | ISO 868 |
| Эластомеры | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Растяжимое напряжение- Поперечный поток | ISO 37 | ||
| 100% strain | 0.900 | MPa | ISO 37 |
| 300% strain | 1.60 | MPa | ISO 37 |
| Растяжимое напряжение- Поперечный поток (Break) | 7.70 | MPa | ISO 37 |
| Растяжимое удлинение- Поперечный поток (Break) | 900 | % | ISO 37 |
| Tear Strength 1 | 19 | kN/m | ISO 34-1 |
| Комплект сжатия 2 | ISO 815 | ||
| 23°C, 72 hr | 17 | % | ISO 815 |
| 70°C, 22 hr | 35 | % | ISO 815 |
| 100°C, 22 hr | 62 | % | ISO 815 |
| Инъекция | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Температура сушки | 80 | °C | |
| Время сушки | 2.0 - 3.0 | hr | |
| Задняя температура | 170 - 190 | °C | |
| Средняя температура | 180 - 200 | °C | |
| Передняя температура | 190 - 210 | °C | |
| Температура сопла | 200 - 220 | °C | |
| Температура формы | 15 - 50 | °C | |
| Скорость впрыска | Moderate-Fast |
| Примечание | |
|---|---|
| 1 . | C method: crescent sample |
| 2 . | Type B |
| Тип материала | Категория | Производитель |
|---|---|---|
| NEOPLAST 180 M/E | TPE | Zylog Plastalloys |
| ADPOLY MB-100 | TPE | Lotte Chemical Corporation |
| Gallonprene® GP520-5503 | TPE | Shenzhen Sungallon Rubber & Plastic Corporation Limited |
| ENFLEX S4025A | TPE | ENPLAST Americas, a Ravago Group Company |
| Sarlink® TPE ME-2675B (PRELIMINARY ACTIVE) | TPE | Teknor Apex Company |
| Evoprene™ G 618 | TPE | Mexichem Specialty Compounds Inc. |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved