- Главная страница
- Поиск продуктов
- MDPE
- DOW™ MDPE NG 7525
DOW™ MDPE NG 7525
| Категория | MDPE, Medium Density Polyethylene Resin |
| Производитель | The Dow Chemical Company |
| Торговая марка | DOW™ MDPE |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
5lPqIu_DOW-MDPE-NG-7525.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
MDPE NG 7525 is a Medium Density Polyethylene Resin produced in the UNIPOL™ Process. This resin is recommended to be used in thin-wall micro-irrigation tape application and profile extrusion application. Resin exhibits good draw down characteristics producing tapes with a reliable balance of extrusion and stiffness.
It can also be used as a component in mixtures with low density polyethylene resins and linear low density polyethylene resins, to modify and improve the mechanical properties. Outdoor applications require the addition of UV stabilizer to maintain the excellent properties over extended periods of UV exposure.
Main Characteristics:
It can also be used as a component in mixtures with low density polyethylene resins and linear low density polyethylene resins, to modify and improve the mechanical properties. Outdoor applications require the addition of UV stabilizer to maintain the excellent properties over extended periods of UV exposure.
Main Characteristics:
- High performance in processability
- Excellent mechanical properties
- High ESCR
- Excellent seal property in drippers
- Complies with Regulation U.S. FDA 21 CFR 177.1520 (c) 3.2a
- Complies with EU, No 10/2011
- Consult the regulation for complete details
| Главная Информация | |
|---|---|
| Рейтинг агентства |
|
| Формы |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Удельный вес | 0.939 | g/cm³ | ASTM D792 |
| Массовый расход расплава (MFR) (190°C/21.6 kg) | 22 | g/10 min | ASTM D1238 |
| Экологическое сопротивление растрескиванию (50°C, 10% Igepal, F0) | > 2000 | hr | ASTM D1693 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Прочность на растяжение 1 | ASTM D638 | ||
| Yield, Compression Molded | 20.0 | MPa | |
| Break, Compression Molded | 26.0 | MPa | |
| Удлинение при растяжении 2(Break, Compression Molded) | > 700 | % | ASTM D638 |
| Флекторный модуль- 2% Secant 3(Compression Molded) | 500 | MPa | ASTM D790 |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Викат Температура размягчения | 121 | °C | ASTM D1525 |
| Время индукции окисления (200°C) | > 20 | min | ASTM D3895 |
| Примечание | |
|---|---|
| 1 . | Plaques prepared according to standard ASTM D 1928 Procedure C. |
| 2 . | Plaques prepared according to standard ASTM D 1928 Procedure C. |
| 3 . | Plaques prepared according to standard ASTM D 1928 Procedure C. |
| Тип материала | Категория | Производитель |
|---|---|---|
| SABIC® LLDPE R50035S | MDPE | Saudi Basic Industries Corporation (SABIC) |
| Moharamplast MDPE MP-IRR 3810 | MDPE | Moharamplast S.A.E |
| VENELENE® 8504UV8D | MDPE | Poliolefinas Internacionales, C.A. (Polinter) |
| TOTAL Polyethylene MDPE 3802 B (Pipe) | MDPE | TOTAL Refining & Chemicals |
| Ethylplus 615 MD | MDPE | Fainplast Compounds S.r.l |
| DOW™ 8818 YL-CF | MDPE | The Dow Chemical Company |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved