- Главная страница
- Поиск продуктов
- LDPE
- SABIC® LDPE nExCoat 5
SABIC® LDPE nExCoat 5
| Категория | LDPE, Low Density Polyethylene |
| Производитель | Saudi Basic Industries Corporation (SABIC) |
| Торговая марка | SABIC® LDPE |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
5292wh_SABIC-LDPE-nExCoat-5.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
SABIC ® LDPE nExCoat 5 is a revolutionary tubular grade without additives, which is specially developed for the extrusion coating market. Its special molecular structure provides a unique combination of properties: processing on very high line speeds, excellent adhesion on different substrates (both at lower extrusion temperatures) and excellent sealing properties, very low gel count, low MFR drop during processing and a lower extruder motor load.
SABIC ® LDPE nExCoat 5 is suitable for all typical extrusion coating applications, such as liquid packaging, imaging, food packaging, release liners and building & construction and can be used for coating on paper, board aluminium foil or other substrates (especially temperature sensitive). Moreover, it can be employed in lamination applications, due to its excellent adhesion properties.
The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.
SABIC ® LDPE nExCoat 5 is suitable for all typical extrusion coating applications, such as liquid packaging, imaging, food packaging, release liners and building & construction and can be used for coating on paper, board aluminium foil or other substrates (especially temperature sensitive). Moreover, it can be employed in lamination applications, due to its excellent adhesion properties.
The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.
| Главная Информация | |
|---|---|
| Характеристики |
|
| Используется |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Плотность | 0.920 | g/cm³ | ISO 1183 |
| Массовый расход расплава (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ISO 1133 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Tensile Stress (Break, 2.00 mm, Compression Molded) | 12.0 | MPa | ISO 527-2/50 |
| Растяжимое напряжение (Break, 2.00 mm, Compression Molded) | 600 | % | ISO 527-2/50 |
| Пленки | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Tensile Stress | ISO 527-3 | ||
| MD : Yield, 25 µm | 7.50 | MPa | ISO 527-3 |
| TD : Yield, 25 µm | 7.50 | MPa | ISO 527-3 |
| MD : Break, 25 µm | 13.0 | MPa | ISO 527-3 |
| TD : Break, 25 µm | 13.0 | MPa | ISO 527-3 |
| Удлинение при растяжении | ISO 527-3 | ||
| MD : Break, 25 µm | 400 | % | ISO 527-3 |
| TD : Break, 25 µm | 550 | % | ISO 527-3 |
| Elmendorf Tear Strength | ISO 6383-2 | ||
| MD : 25 µm | 45000 | N | ISO 6383-2 |
| TD : 25 µm | 45000 | N | ISO 6383-2 |
| Проницаемость кислорода- 0% RH на 24h (23°C) | 0.80 | cm³/cm²/bar | ISO 15105-2 |
| Проницаемость водяного пара- 90% RH на 24h (38°C) | 20.0 | g/m² | ISO 15106-3 |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Enthalpy Change | 100 | J/g | DIN 53765 |
| Викат Температура размягчения | 88.0 | °C | ISO 306 |
| Температура плавления (DSC) | 107 | °C | DIN 53765 |
| Тип материала | Категория | Производитель |
|---|---|---|
| Aarolene® ARPE LD 300-1 | LDPE | Aaron Industries Corp. |
| ASI POLYETHYLENE CP 795-01 Natural | LDPE | A. Schulman Inc. |
| ExxonMobil™ LDPE LD 101BA Wire & Cable | LDPE | ExxonMobil Chemical |
| INEOS LDPE 22H594 | LDPE | INEOS Olefins & Polymers Europe |
| ICORENE® 2010 | LDPE | ICO Polymers APAC, A Division of A. Schulman |
| PETILEN G08-21TA | LDPE | PETKIM Petrokimya Holding A.S. |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved