- Главная страница
- Поиск продуктов
- PP
- Pinnacle PP 1112
Pinnacle PP 1112
| Категория | PP, Polypropylene Homopolymer , PP Homopolymer |
| Производитель | Pinnacle Polymers |
| Торговая марка | Pinnacle PP |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
4DwlzF_Pinnacle-PP-1112.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
12 MELT FLOW HOMOPOLYMER FOR INJECTION MOLDING
Pinnacle Polymers Polypropylene 1112 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.
This product is intended for general-purpose injection molding such as resin furniture, closures, and consumer product applications.
The 1112 product provides:
Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.
Pinnacle Polymers Polypropylene 1112 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.
This product is intended for general-purpose injection molding such as resin furniture, closures, and consumer product applications.
The 1112 product provides:
- Excellent color and processing stability
- Good flow characteristics
- Excellent organoleptic properties
- UL Listed
Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.
| Главная Информация | |
|---|---|
| Характеристики |
|
| Используется |
|
| Рейтинг агентства |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Плотность | 0.900 | g/cm³ | ASTM D1505 |
| Массовый расход расплава (MFR) (230°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Формовочная усадка- Поток | 1.4 | % | ASTM D955 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Прочность на растяжение 1(Yield, 3.20 mm, Injection Molded) | 34.5 | MPa | ASTM D638 |
| Удлинение при растяжении 2(Yield, 3.20 mm, Injection Molded) | 9.0 | % | ASTM D638 |
| Флекторный модуль- 1% Secant 3(3.20 mm, Injection Molded) | 1650 | MPa | ASTM D790A |
| Воздействие | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Зубчатый изод Impact 4(23°C, 3.20 mm, Injection Molded) | 32 | J/m | ASTM D256 |
| Зубчатый изод удара (площадь) 5(23°C, 3.20 mm, Injection Molded) | 3.10 | kJ/m² | ASTM D256 |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Температура отклонения при нагрузке (0.45 MPa, Unannealed) | 105 | °C | ASTM D648 |
| Примечание | |
|---|---|
| 1 . | Type I, 51 mm/min |
| 2 . | Type I, 51 mm/min |
| 3 . | Type I, 1.3 mm/min |
| 4 . | Type I |
| 5 . | Type I |
| Тип материала | Категория | Производитель |
|---|---|---|
| Generic PP, Unspecified - Wood Fiber | PP, Unspecified | Generic |
| HIPOLEN P® TA 3 | PP Homopolymer | HIPOL A.D. |
| INNOPOL® PP CS 2-3522 TO BU | PP Copolymer | Inno-Comp Ltd. |
| Tecnoprene® FK7HCR NAT001 | PP Homopolymer | SO.F.TER. SPA |
| Thermylene® P6-50FG-0100 | PP, Unspecified | Asahi Kasei Plastics North America Inc. |
| Toughblend® PP-1302 | PP, Unspecified | Colour Image Plastic Compound Sdn. Bhd. (CIPC) |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved