Purgex™ 457 Plus

Категория	PE, Polyethylene , PE, Unspecified
Производитель	Neutrex, Inc.
Торговая марка	Purgex™
Порт	Китай Шанхайский порт
Торговые условия	FOB, CFR, CIF
Платежное средство	L/C, T/T, Western Union
PDF	3zgGhG_Purgex-457-Plus.pdf
Контактная информация	EMAIL US  sales@su-jiao.com Служба поддержки клиентов Вичат

Описание материалов:

Blend, polyethylene, 3% glass, and an FDA-approved active component

Non-toxic, non-abrasive, and safe

Ready to use and easy to remove

Temperature Range:

Operating temperature range of 300°F to 550°F (149°C to 288°C)

Applications:

PURGEX 457 Plus is used for color and/or material changes and the removal of residual contamination in thermoplastic injection molding, extrusion, or blow molding equipment.

PURGEX 457 Plus will efficiently purge the barrel, screw, and nozzle, as well as hot runner systems, removing all types of colorants and commodity resins, including polypropylene, polyethylene, and their copolymers, particularly if they contain glass or fillers.

PURGEX 457 Plus assures rapid turnaround on color and material changes with polyolefins and their copolymers, styrenics polymers, acetals, vinyls, TPO, TPU, and many other resins processed in this temperature range. PURGEX 457 Plus can also be used on PVC purging applications and will neutralize HCl gasses.

Главная Информация
Используется	Очистительная смесь
Метод обработки	Экструзия Литье под давлением

Инструкции по впрыску
Empty barrel of production resin. Add PURGEX 457 Plus to the hopper (a minimum of 1.5 times the injection capacity). Purge the barrel until PURGEX exits the nozzle. Soak five minutes at processing temperature with barrel full and screw in forward position. Purge barrel to empty. Follow with next production resin, rinsing PURGEX from machine. Resume molding.

Инструкции по экструзии
Empty extruder. Remove screen. Seal vent. Fill extruder with PURGEX 457 Plus. Make certain extruder is full and PURGEX is exiting the nozzle as a foaming material. Soak five minutes at processing temperature. Add the next resin to be extruded and remove all PURGEX from the extruder. When it appears that PURGEX has been completely removed, replace the screen, open the vent, and commence production.

Инструкции по экструзии

Empty extruder. Remove screen. Seal vent. Fill extruder with PURGEX 457 Plus. Make certain extruder is full and PURGEX is exiting the nozzle as a foaming material. Soak five minutes at processing temperature. Add the next resin to be extruded and remove all PURGEX from the extruder. When it appears that PURGEX has been completely removed, replace the screen, open the vent, and commence production.

Тип материала	Категория	Производитель
REVOLVE® M-711	PE, Unspecified	Matrix Polymers
REVOLVE® M-594	PE, Unspecified	Matrix Polymers
Spherisil P 23-08660	PE, Unspecified	SILON s.ro
Spherisil P 23-08680	PE, Unspecified	SILON s.ro
DOW™ Butene 1220G1	PE, Unspecified	The Dow Chemical Company
Favorite REG235	PE, Unspecified	Favorite Plastics

Получите информацию об этом продукте следующим способом.

Телефон	+086 13424755533
EMAIL US	sales@su-jiao.com
Служба поддержки клиентов Вичат

