- Главная страница
- Поиск продуктов
- PUR
- Ebalta GM 984-1 / Comp. A+B
Ebalta GM 984-1 / Comp. A+B
| Категория | PUR, Polyurethane , PUR, Unspecified |
| Производитель | Ebalta Kunststoff GmbH |
| Торговая марка | Ebalta |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
3Bh182_Ebalta-GM-984-1-Comp-A-B.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
This product is a polyurethane system.
GM 984-1 Comp. B (Amine) can be subject to colour variations due to raw materials, but these colour variations have no influence on the quality and the properties of the product.
The postcured material is not UV stable and darkens by and by. However according to our experience the change in colour does not affect its utilizability.
Physical final properties will be achieved after 7 days' curing at room temperature or after postcuring for 8 hrs. at 80°C.
As bonding agent on aluminium support we recommend our PU coupling paste KP 8.
Applications
Properties
GM 984-1 Comp. B (Amine) can be subject to colour variations due to raw materials, but these colour variations have no influence on the quality and the properties of the product.
The postcured material is not UV stable and darkens by and by. However according to our experience the change in colour does not affect its utilizability.
Physical final properties will be achieved after 7 days' curing at room temperature or after postcuring for 8 hrs. at 80°C.
As bonding agent on aluminium support we recommend our PU coupling paste KP 8.
Applications
- Core boxes
- fixtures
Properties
- non-toxic according to regulations for hazardous material
- Shore D hardness approx. 65
- hard elastomeric
- very well castable
- no brittleness phase
- very abrasion resistant
| Главная Информация | |
|---|---|
| Характеристики |
|
| Внешний вид |
|
| Метод обработки |
|
| Твердость | Номинальное значение | Метод испытания | |
|---|---|---|---|
| Твердость дюрометра (Shore D) | 63 - 67 | ISO 7619 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Tensile Stress | 37.0 - 41.0 | MPa | ISO 527-2 |
| Растяжимое напряжение (Break) | 300 - 320 | % | ISO 527-2 |
| Флекторный модуль | 747 - 827 | MPa | ISO 178 |
| Флекторный стресс | 27.0 - 29.0 | MPa | ISO 178 |
| Устойчивость к истиранию (500 Cycles, 500g, H-18 wheel) | 17.0 | mg | Internal method |
| Flexural Strain at Flexural Strength | 6.5 - 7.5 | % | ISO 178 |
| Термокомплект | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Компоненты термокомплекта | |||
| Resin | Mixing ratio by weight: 100 | ||
| Hardening method | Mixing ratio by weight: 130 |
| Дополнительная информация |
|---|
| Wear jet test : 41 W(V/t) [mm³/min] (internal tests) |
| Uncured Properties | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Плотность (20°C) | 1.13 - 1.17 | g/cm³ | |
| Вязкость (25°C) | 2.5 - 2.9 | Pa·s | |
| Время отверждения (20°C) | 12 - 16 | hr | |
| Срок службы горшка 1(20°C) | 30 - 45 | min |
| Примечание | |
|---|---|
| 1 . | 200 g |
| Тип материала | Категория | Производитель |
|---|---|---|
| Evermore PUR UDA-10X | PUR-Ether | Evermore Chemical Industry Co., Ltd. |
| Vytaflex® 40 | PUR, Unspecified | Smooth-On, Inc |
| Ebalta MG 804, 804 GF / MG 804-1 | PUR, Unspecified | Ebalta Kunststoff GmbH |
| CONATHANE® EN-2552 | PUR, Unspecified | Cytec Industries Inc. |
| Baydur® 728 IBS (40 pcf) | PUR-MDI | Covestro - PUR |
| Adiprene® LW 570 | PUR-Eth,aliphat | Chemtura |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved