- Главная страница
- Поиск продуктов
- PO
- Toppyl SP 2103 C
Toppyl SP 2103 C
| Категория | PO, Polyolefin , Polyolefin, Unspecified |
| Производитель | LyondellBasell Industries |
| Торговая марка | Toppyl |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
2nwwIT_Toppyl-SP-2103-C.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
Toppyl SP 2103 C is a barefoot seal peel solution developed for the cast and blown film technology.
This product has been designed to offer a peelable seal to PP substrates and is suitable for sterilisable applications.
Toppyl SP 2103 C is a solution created to replace completely the sealing layer in a coextruded film.
It provides a constant easy-opening force over a wide sealing temperature window and is readily processable on conventional equipment in both mono and co-extruded structures.
EU and FDA compliance information about this product can be found in separate product documentation.
This product is not intended for use in medical and pharmaceutical applications.
This product has been designed to offer a peelable seal to PP substrates and is suitable for sterilisable applications.
Toppyl SP 2103 C is a solution created to replace completely the sealing layer in a coextruded film.
It provides a constant easy-opening force over a wide sealing temperature window and is readily processable on conventional equipment in both mono and co-extruded structures.
EU and FDA compliance information about this product can be found in separate product documentation.
This product is not intended for use in medical and pharmaceutical applications.
| Главная Информация | |
|---|---|
| Характеристики |
|
| Используется |
|
| Рейтинг агентства |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Плотность | 0.902 | g/cm³ | ISO 1183 |
| Массовый расход расплава (MFR) (230°C/2.16 kg) | 6.0 | g/10 min | ISO 1133 |
| Пленки | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Сектантный модуль- 2% сектант, MD | 260 | MPa | ASTM D882 |
| Прочность на растяжение- MD | ASTM D882 | ||
| Yield | 15.0 | MPa | ASTM D882 |
| Fracture | 33.0 | MPa | ASTM D882 |
| Растяжимое удлинение- MD (Break) | 790 | % | ASTM D882 |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Викат Температура размягчения | 107 | °C | ISO 306/A50 |
| Дополнительная информация |
|---|
| Recommended processing temperatures: 185°C to 265°C. In cases were higher temperatures are required please contact your appropriate technical contact for support. |
| Тип материала | Категория | Производитель |
|---|---|---|
| Moplen EP229R | Polyolefin, Unspecified | LyondellBasell Industries |
| FRAGOM PR/420 NAT P | Polyolefin, Unspecified | Crosspolimeri S.p.A. |
| Ecobarrier® 2014 | Polyolefin, Unspecified | Noble Polymers |
| Hostacom X M2 T28 | Polyolefin, Unspecified | LyondellBasell Industries |
| CALSIN SE107 | Polyolefin, Unspecified | Pooya Polymer Tehran |
| Adsyl 7622 XCP | Polyolefin, Unspecified | LyondellBasell Industries |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved