Описание материалов:
Monprene CP-28964 is a clear high performance thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene CP-28964 is a medium hardness grade that exhibits excellent sunlight resistance and UV absorbing characteristics, suitable for injection molding and extrusion.
| Главная Информация | |
|---|
| Характеристики | - Низкий удельный вес
- Защита от солнечного света
- Без наполнителей
- Низкая плотность
- Гладкость
- Стабилизация света
- Средняя степень жидкости
- Смазка
- Средняя твердость
- Ультрафиолетовое поглощение
|
| Используется | - Оборудование для безопасности
- Ручка
- Кухонные принадлежности
- Шайба
- Фитинги для труб
- Спортивные товары
- Канцелярские принадлежности
- Применение потребительских товаров
|
| Соответствие RoHS | |
| Внешний вид | |
| Формы | |
| Метод обработки | - Экструзия
- Литье под давлением
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Удельный вес | 0.888 | g/cm³ | ASTM D792 |
| Массовый расход расплава (MFR) (200°C/5.0 kg) | 14 | g/10 min | ASTM D1238 |
| Твердость | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Твердость дюрометра | | | ASTM D2240 |
| Shore A, 1 second, injection molding | 70 | | ASTM D2240 |
| Shore A, 5 seconds, injection molding | 67 | | ASTM D2240 |
| Эластомеры | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Tensile Stress 1 | | | ASTM D412 |
| Transverse flow
: 100% strain | 2.53 | MPa | ASTM D412 |
| Flow
: 100% strain | 3.85 | MPa | ASTM D412 |
| Transverse flow
: 300% strain | 3.52 | MPa | ASTM D412 |
| Flow
: 300% strain | 4.76 | MPa | ASTM D412 |
| Прочность на растяжение 2 | | | ASTM D412 |
| Transverse flow
: Fracture | 13.6 | MPa | ASTM D412 |
| Flow
: Fracture | 5.10 | MPa | ASTM D412 |
| Удлинение при растяжении 3 | | | ASTM D412 |
| Transverse flow
: Fracture | 780 | % | ASTM D412 |
| Flow
: Fracture | 390 | % | ASTM D412 |
| Tear Strength 4 | | | ASTM D624 |
| Transverse flow | 39.4 | kN/m | ASTM D624 |
| Flow | 34.5 | kN/m | ASTM D624 |
| Комплект сжатия 5 | | | ASTM D395B |
| 23°C, 22 hr | 25 | % | ASTM D395B |
| 70°C, 22 hr | 46 | % | ASTM D395B |
| Юридическое заявление |
|---|
| The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries. |
| Инъекция | Номинальное значение | Единица измерения | |
|---|
| Задняя температура | 182 - 232 | °C | |
| Средняя температура | 188 - 238 | °C | |
| Передняя температура | 193 - 243 | °C | |
| Температура сопла | 199 - 249 | °C | |
| Температура обработки (расплава) | 199 - 249 | °C | |
| Температура формы | 35 - 49 | °C | |
| Давление впрыска | 1.38 - 5.52 | MPa | |
| Скорость впрыска | Fast | | |
| Back Pressure | 0.172 - 0.689 | MPa | |
| Screw Speed | 50 - 100 | rpm | |
| Подушка | 3.81 - 25.4 | mm | |
| Инструкции по впрыску |
|---|
| 无需干燥。但如果湿度过大，则将粒料在150°F (65°C)的温度下干燥2-4小时。 |
| Экструзия | Номинальное значение | Единица измерения | |
|---|
| Зона цилиндра 1 темп. | 182 - 232 | °C | |
| Зона цилиндра 2 температура. | 188 - 238 | °C | |
| Зона цилиндра 3 темп. | 193 - 243 | °C | |
| Зона цилиндра 5 темп. | 199 - 249 | °C | |
| Температура матрицы | 199 - 249 | °C | |
| Инструкции по экструзии |
|---|
| 螺杆转速30 - 100 rpm |
| Примечание |
|---|
| 1 . | C mold, 510mm/min |
| 2 . | C mold, 510mm/min |
| 3 . | C mold, 510mm/min |
| 4 . | C mold, 510mm/min |
| 5 . | Type 1 |
