- Главная страница
- Поиск продуктов
- LLDPE
- Braskem PE LL5400S
Braskem PE LL5400S
| Категория | LLDPE, Linear Low Density Polyethylene |
| Производитель | Braskem |
| Торговая марка | Braskem PE |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
1keEKc_BraskemPELL5400S.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
LL5400S is a Linear Low Density Polyethylene developed for blown film extrusion in blends with polyethylenes. Films obtained with this product show a good processing performance balanced with good optical and mechanical properties as well as sealability. Very low gel amount. It contains antioxidant additives.
Applications:
Liners; LDPE and HDPE blends and packages for general use.
Others applications: blends for irrigation pipes.
Process:
Recommended processing conditions for film extrusion about 170 - 210 °C. The optimum processing conditions will vary according to the type of equipment used and cannot be considered as performance guarantee.
Applications:
Liners; LDPE and HDPE blends and packages for general use.
Others applications: blends for irrigation pipes.
Process:
Recommended processing conditions for film extrusion about 170 - 210 °C. The optimum processing conditions will vary according to the type of equipment used and cannot be considered as performance guarantee.
| Главная Информация | |
|---|---|
| Добавка |
|
| Характеристики |
|
| Используется |
|
| Рейтинг агентства |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Плотность | 0.918 | g/cm³ | ASTM D1505 |
| Массовый расход расплава (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Пленки | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Прочность на растяжение | ASTM D882 | ||
| MD : Broken, 38 µm, blown film | 40.0 | MPa | ASTM D882 |
| TD : Broken, 38 µm, blown film | 30.0 | MPa | ASTM D882 |
| Удлинение при растяжении | ASTM D882 | ||
| MD : Broken, 38 µm, blown film | 1100 | % | ASTM D882 |
| TD : Broken, 38 µm, blown film | 1400 | % | ASTM D882 |
| Флекторный модуль | ASTM D790 | ||
| 1% Secant, MD : 38 µm, Blown Film | 170 | MPa | ASTM D790 |
| 1% Secant, TD : 38 µm, Blown Film | 200 | MPa | ASTM D790 |
| Ударное падение Dart (38 µm, Blown Film) | 120 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 38 µm, blown film | 100 | g | ASTM D1922 |
| TD : 38 µm, blown film | 400 | g | ASTM D1922 |
| Оптический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Блеск (60°, 38.0 µm, Blown Film) | 110 | ASTM D2457 | |
| Haze (38.0 µm, Blown Film) | 10 | % | ASTM D1003 |
| Тип материала | Категория | Производитель |
|---|---|---|
| ULTZEX™ 15150J | LLDPE | Prime Polymer Co., Ltd. |
| AXELERON™ GP 6059 BK CPD | LLDPE | The Dow Chemical Company |
| Indothene LL 20FS020 | LLDPE | Reliance Industries Limited |
| RELENE® X24065 | LLDPE | Reliance Industries Limited |
| Petrothene® GA643000 | LLDPE | LyondellBasell Industries |
| HIFOR Xtreme® SC74883 | LLDPE | Westlake Chemical Corporation |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved