- Главная страница
- Поиск продуктов
- HDPE
- INTREPID™ 2498 BK
INTREPID™ 2498 BK
| Категория | HDPE, Bimodal Polyethylene Resin |
| Производитель | The Dow Chemical Company |
| Торговая марка | INTREPID™ |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
0cOlgq_INTREPID-2498-BK.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
INTREPID™ 2498 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product is intended for use in industrial piping system where extreme conditions such as high pressures, elevated temperatures and aggressive chemicals or hydrocarbons exist. Suitable uses include oil & gas field pipelines, gas distribution pipelines, and other industrial applications.
Industrial Standards Compliance:
ASTM D 3350: cell classification
NOTES: (1) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092 BK).
Industrial Standards Compliance:
ASTM D 3350: cell classification
- Black - PE445576C (MRS) (See NOTES 1)
- Black - PE445574C (HDB) (See NOTES 1)
- Black Pipe - INTREPID 2498 BK (See NOTES 1)
- ISO PE100 pipe grade - MRS 10 @ 20°C
- ASTM PE4710 pipe grade - 1600 psi HDB and 1000 psi HDS @ 73°F, and 1000 psi HDB @ 140°F
NOTES: (1) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092 BK).
| Главная Информация | |
|---|---|
| Добавка |
|
| Рейтинг агентства |
|
| Внешний вид |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Удельный вес | ASTM D792 | ||
| Natural | 0.949 | g/cm³ | |
| Black 1 | 0.959 | g/cm³ | |
| Массовый расход расплава (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.080 | g/10 min | |
| 190°C/21.6 kg | 7.0 | g/10 min |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Прочность на растяжение 2(Yield) | > 24.1 | MPa | ASTM D638 |
| Удлинение при растяжении 3(Break) | > 500 | % | ASTM D638 |
| Флекторный модуль | 1030 | MPa | ASTM D790B |
| Прочность на разрыв- 1798 фунтов/кв. дюйм (12,4 МПа) (20 °C) | > 200 | hr | ISO 1167 |
| Гидростатическая прочность 4 | ISO 4427 | ||
| 1798 psi (12.4 MPa) : 20°C | > 200 | hr | |
| 725 psi (5.0 MPa) : 80°C | > 1000 | hr | |
| Устойчивость к быстрому размножению трещин, ПК | |||
| Calculated, Full Scale : 0°C 5 | > 46.0 | bar | ISO 13478 |
| S-4 : 0°C 6 | > 12.0 | bar | ISO 13477 |
| Устойчивость к быстрому размножению трещин, Tc- S-4 @ 10 бар 7 | < -17 | °C | ISO 13477 |
| Устойчивость к короткое время гидравлического давления | > 27.6 | MPa | ASTM D1599 |
| Медленная трещина роста 8 | > 10000 | hr | ASTM F1473 |
| Устойчивость к стрессу- Зазубрина трубы (80 °C) 9 | > 1000 | hr | ISO 13479 |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Термическая стабильность | > 220 | °C | ASTM D3350 |
| Воздействие | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Зубчатый изод Impact 10(23°C) | 490 | J/m | ASTM D256A |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Температура ломкости 11 | < -75.0 | °C | ASTM D746A |
| Примечание | |
|---|---|
| 1 . | Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%). |
| 2 . | Compression molded parts prepared according to ASTM D 4703 Procedure C unless otherwise noted in the test method. Properties will vary with changes in molding conditions and aging time. |
| 3 . | Compression molded parts prepared according to ASTM D 4703 Procedure C unless otherwise noted in the test method. Properties will vary with changes in molding conditions and aging time. |
| 4 . | Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%). |
| 5 . | Calculated value, determined by the equation in ISO 4437 based on S-4 test data. Pipe diameter of 10 inch IPS (25.4 cm) and Standard Diameter Ratio (SDR) 11 |
| 6 . | Pipe diameter of 10 inch IPS (25.4 cm) and Standard Diameter Ratio (SDR) 11. |
| 7 . | Pipe diameter of 10 inch IPS (25.4 cm) and Standard Diameter Ratio (SDR) 11. |
| 8 . | Compression molded parts prepared according to ASTM D 4703 Procedure C unless otherwise noted in the test method. Properties will vary with changes in molding conditions and aging time. |
| 9 . | 133 psi (0.92 MPa) |
| 10 . | Compression molded parts prepared according to ASTM D 4703 Procedure C unless otherwise noted in the test method. Properties will vary with changes in molding conditions and aging time. |
| 11 . | Compression molded parts prepared according to ASTM D 4703 Procedure C unless otherwise noted in the test method. Properties will vary with changes in molding conditions and aging time. |
| Тип материала | Категория | Производитель |
|---|---|---|
| DOW™ HDPE TCP-2495 NT | HDPE | The Dow Chemical Company |
| Eleme HBG00346 | HDPE | Eleme Petrochemical Company Ltd |
| Eleme HBG00356 | HDPE | Eleme Petrochemical Company Ltd |
| Kazan HDPE 273-285 | HDPE | Kazanorgsintez Joint Stock Company |
| DOW™ HDPE DGDA-2426 NT | HDPE | The Dow Chemical Company |
| RTP 707 | HDPE | RTP Company |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved