Описание материалов:
Baytec GS-V85A is a two-component, one-shot system that yields a solid polyurethane elastomer. The isocyanate component is an isocyanate-terminated (MDI) polyester prepolymer, and the polyol component is a polyethylene/polybutylene adipate diol. The Baytec GS-V85A system is used in the production of cast polyurethane elastomers. As with any product, use of the Baytec GS-V85A system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.
| Твердость | Номинальное значение | | Метод испытания |
|---|
| Твердость дюрометра (Shore A) | 96 | | ASTM D2240 |
| Эластомеры | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Прочность на растяжение (Break) | 43.4 | MPa | ASTM D412 |
| Удлинение при растяжении (Break) | 490 | % | ASTM D412 |
| Tear Strength | | | |
| -- 1 | 126 | kN/m | ASTM D624 |
| Cracking | 64 | kN/m | ASTM D1938 |
| Комплект сжатия (70°C, 22 hr) | 23 | % | ASTM D395B |
| Сопротивляемость Bayshore | 42 | % | ASTM D2632 |
| Термокомплект | Номинальное значение | | |
|---|
| Компоненты термокомплекта | | | |
| Part C 2 | Mixing ratio by weight: 20 | | |
| Component a 3 | Mixing ratio by weight: 120 | | |
| Component B 4 | Mixing ratio by weight: 80 | | |
| Дополнительная информация |
|---|
| Part A
Type: Isocyanate
Appearance: Pale yellow liquid
Specific Gravity @ 25°C: 1.20
Viscosity @25°C: 1100 mPa
Flash Point, PMCC: 207°C
NCO: 18.9 wt%
Bulk Density at 25°C: 10.01 lb/gal
Part B
Type: Polyol
Appearance: Light yellow liquid
Specific Gravity @ 25°C: 1.17
Viscosity @25°C: Semisolid
Flash Point, PMCC: 216°C
Bulk Density at 25°C: 9.76 lb/gal
Hydroxyl Number: 55 mg KOH/g
Material Temperature: 55 to 60°CMold Temperature: 110°CDemold Time: 0.5 to 4 hr |
| Примечание |
|---|
| 1 . | C mould |
| 2 . | 1,4 Butone Diol |
| 3 . | Isocyanate |
| 4 . | Polyol |
